Student Pack
What is the purpose of this document?
The Student Pack is the document you, the student, needs to complete to demonstrate competency. This document includes the context and conditions of your assessment, the tasks to be completed by you and an outline of the evidence to be gathered.
The information includes the following:
- Information related to the unit of competency
- Guidelines and instructions to complete each task and activity
- A student evaluation form
Student Evaluation Form
These documents are designed after conducting thorough industry consultation. Students are encouraged to evaluate this document and provide constructive feedback to their training organisation if they feel that this document can be improved.
Link to other unit documents
- The Student Pack is a document for students to complete to demonstrate their competency. This document includes context and conditions of assessment, tasks to be administered to the student, and an outline of the evidence to be gathered from the student.
- The Unit Mapping is a document that contains information and comprehensive mapping with the training package requirements.
- The Unit Requirements is a document that contains information related to the unit of competency for the Training Organisation staff and students.
Document Usage
CAQA Resources
https://caqaresources.com.au/
Student Pack © 2019 CAQA Resources, CAQA and RTO Training Resources
This template and all its including associated content is a copyrighted work under Australian and other copyright laws. Do not submit copies or modifications of this template to any website or any third parties. Please review the following license agreement to learn how you may or may not use this template.
License Agreement:
Copyright protects this material. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher to use for a specific intended purpose. The only exception is brief quotations embodied in critical reviews and certain other noncommercial uses permitted by Copyright Act 1968 (Cth). For permission requests, write to the publisher, addressed “Attention: Permissions Coordinator,” at the address below.
If you believe that information of any kind in this publication is an infringement of copyright, in the material in which you either own the copyright or are authorised to exercise the rights of a copyright owner, and then please advise us by contacting CAQA, Career Calling International Pty. Ltd. 2/10 Lawn Court, Craigieburn, Victoria 3064.
· Student and trainer details
| Student details | |
| Full name: | |
| Student ID: | |
| Contact number: | |
| Email address: | |
| Trainer details | |
| Full name: | |
· Qualification and unit of competency
| Qualification/Course/Program Details | |
| Code: | |
| Name: | |
| Unit of competency | |
| Code: | CPCCCA3010 |
| Name: | Install windows and doors |
| Releases: | 1.0 |
| Release date: | 27/Nov/2020 |
· Assessment Submission Method
| ☐ By hand to trainer/assessor ☐ By email to trainer/assessor ☐ Online submission via Learning Management System (LMS) ☐ Any other method _________________________________________________ (Please describe here) |
· Student declaration
| · I have read and understood the information in the Unit Requirements prior to commencing this Student Pack · I certify that the work submitted for this assessment pack is my own. I have clearly referenced any sources used in my submission. I understand that a false declaration is a form of malpractice; · I have kept a copy of this Student Pack and all relevant notes, attachments, and reference material that I used in the production of this Student Pack; · For the purposes of assessment, I give the trainer/assessor permission to: · Reproduce this assessment and provide a copy to another member of staff; and · Take steps to authenticate the assessment, including communicating a copy of this assessment to a plagiarism checking service (which may retain a copy of the assessment on its database for future plagiarism checking). Student signature: ________________________________ Date: ____/_____/______________ |
· Assessment Plan
| The student must be assessed as satisfactory in each of the following assessment methods in order to demonstrate competence in a variety of ways. | |||
| Evidence number/ Task number | Assessment method/ Type of evidence/ Task name | Sufficient evidence recorded/Outcome | |
| Assessment task 1 | Knowledge Test (KT) | S / NS (First Attempt) S / NS (Second Attempt) |
|
| Assessment task 2 | Skills Test (ST) | S / NS (First Attempt) S / NS (Second Attempt) |
|
| Outcome | C ☐ NYC ☐ |
Date assessed: |
Trainer signature: |
· Completion of the Assessment Plan
| Your trainer is required to fill out the Assessment Plan Outcome records above, when: · You have completed and submitted all the requirements for the assessment tasks for this cluster or unit of competency. · Your work has been reviewed and assessed by your trainer/assessor. · You have been assessed as either satisfactory or unsatisfactory for each assessment task within the unit of competency. · You have been provided with relevant and detailed feedback. Every assessment has a “Feedback to Student” section used to record the following information. Your trainer/assessor must also ensure that all sections are filled in appropriately, such as: · Result of Assessment (satisfactory or unsatisfactory) · Student name, signature and date · Assessor name, signature and date · Relevant and detailed feedback |
· Unit Requirements
| You, the student, must read and understand all of the information in the Unit Requirements before completing the Student Pack. If you have any questions regarding the information, see your trainer/assessor for further information and clarification. |
Pre-Assessment Checklist: Task 1 – Knowledge Test
| The purpose of this checklist |
| The pre-assessment checklist helps students determine if they are ready for assessment. The trainer/assessor must review the checklist with the student before the student attempts the assessment task. If any items of the checklist are incomplete or not clear to the student, the trainer/assessor must provide relevant information to the student to ensure they understand the requirements of the assessment task. The student must ensure they are ready for the assessment task before undertaking it. |
| Section 1: Information for Students |
| ☐ Make sure you have completed the necessary prior learning before attempting this assessment. ☐ Make sure your trainer/assessor clearly explained the assessment process and tasks to be completed. ☐ Make sure you understand what evidence is required to be collected and how. ☐ Make sure you know your rights and the Complaints and Appeal process. ☐ Make sure you discuss any special needs or reasonable adjustments to be considered during the assessment (refer to the Reasonable Adjustments Strategy Matrix – Appendix A and negotiate these with your trainer/assessor). ☐ Make sure that you have access to a computer and the internet (if you prefer to type the answers). ☐ Make sure that you have all the required resources needed to complete this assessment task. ☐ The due date of this assessment task is in accordance with your timetable. ☐ In exceptional (compelling and compassionate) circumstances, an extension to submit an assessment can be granted by the trainer/assessor. Evidence of the compelling and compassionate circumstances must be provided together with your request for an extension to submit your assessment work. ☐ The request for an extension to submit your assessment work must be made before the due date. |
| Section 2: Reasonable adjustments |
| I confirm that I have reviewed the Reasonable Adjustments guidelines and criteria as provided in Appendix A and attached relevant evidence as required and select the correct checkbox. ☐ I do require reasonable adjustment ☐ I do not require reasonable adjustment |
| Declaration (Student to complete) ☐ I confirm that the purpose and procedure of this assessment task has been clearly explained to me. ☐ I confirm that I have been consulted about any special needs I might have in relation to the assessment process. ☐ I confirm that the criteria used for this assessment has been discussed with me, as have the consequences and possible outcomes of this assessment. ☐ I confirm I have accessed and understand the assessment information as provided in the Training Organisation’s Student Handbook. ☐ I confirm I have been given fair notice of the date, time, venue and/or other arrangements for this assessment. ☐ I confirm that I am ready for assessment. Student Name: ______________________________________ Student Signature: ___________________________________ |
Assessment method-based instructions and guidelines: Knowledge Test
| Assessment type |
|
| Instructions provided to the student: |
| Assessment task description: |
| · This is the first (1) assessment task you must successfully complete to be deemed competent in this unit of competency. · The Knowledge Test is comprised of twelve (12) written questions · You must respond to all questions and submit them to your Trainer/Assessor. · You must answer all questions to the required level, e.g. provide an answer within the required word limit, to be deemed satisfactory in this task · You will receive your feedback within two (2) weeks, and you will be notified by your Trainer/Assessor when your results are available. |
| Applicable conditions: |
| · All knowledge tests are untimed and are conducted as open book assessment (this means you can refer to your textbook during the test). · You must read and respond to all questions. · You may handwrite/use a computer to answer the questions. · You must complete the task independently. · No marks or grades are allocated for this assessment task. The outcome of the task will be Satisfactory or Not Satisfactory. · As you complete this assessment task, you are predominately demonstrating your written skills and knowledge to your trainer/assessor. |
| Resubmissions and reattempts: |
|
| Location: |
|
| Instructions for answering the written questions: |
| · Complete a written assessment consisting of a series of questions. · You will be required to answer all the questions correctly. · Do not start answering questions without understanding what is required. Read the questions carefully and critically analyse them for a few seconds; this will help you to identify what information is needed in the answer. · Your answers must demonstrate an understanding and application of the relevant concepts and critical thinking. · Be concise, to the point and write answers within the word-limit given to each question. Do not provide irrelevant information. Remember, quantity is not quality. · You must write your responses in your own words. · Use non-discriminatory language. The language used should not devalue, demean, or exclude individuals or groups based on attributes such as gender, disability, culture, race, religion, sexual preference or age. Gender-inclusive language should be used. · When you quote, paraphrase, summarise or copy information from other sources to write your answers or research your work, always acknowledge the source. |
| Purpose of the assessment |
| This assessment task is designed to evaluate student’s knowledge essential to install windows and doors of contexts and industry settings and knowledge regarding the following: · Knowledge of the compliance requirements of the National Construction Code and Australian Standards, relevant to installing windows and doors, including AS2688 Timber and composite doors and AS2047 Windows and external glazed doors in buildings, and Australian Window Association – An Industry Guide to the Correct Fixing of Windows and Doors · Knowledge of the workplace quality policies and standards relevant to installing windows and doors · Knowledge of the safety requirements for installing windows and doors · Knowledge of the flashing requirements and installation techniques relevant to installing windows and doors · Knowledge of the plans, specifications and drawings for installing windows and doors · Knowledge of the types of tools and equipment required to install windows and doors, their characteristics, uses and limitations · Knowledge of the processes for setting out windows and doors · Knowledge of the processes for calculating material requirements for installing windows and doors · Knowledge of the materials relevant to installing windows and doors · Knowledge of the various types of doors: o flush panel, framed and panelled, and glazed o hinged door units including standard doors, sliding, flywire, combination window and door units, door sidelight units (glazed or unglazed) and internal doors o jambs, stiles and sills o flashing · door furniture, including flush pulls, latches and deadlocks, push plates and closers, handles and locks · window, door installation including flashing and fixing · types of windows and doors, materials used and their characteristics and uses. |
| Task instructions |
| · This is an individual assessment. · To ensure your responses are satisfactory, consult a range of learning resources and other information such as handouts, textbooks, learner resources etc. · To be assessed as Satisfactory in this assessment task, all questions must be answered correctly. |
Assessment Task 1: Knowledge Test
Provide your response to each question in the box below.
| Q1: | Answer the following questions: 1.1. What are Australian building standards? 1.2. What are the requirements for compliance and conformance according to National Construction Code (NCC)?. 1.3. How can you differentiate between NCC and Australian standards? 1.4. What are the compliance requirements specificed in AS2688 Timber and composite doors? 1.5. What are the compliance requirements specificed in AS2047 Windows and external glazed doors in buildings? 1.6. Wat are the compliance requirements for installation of windows as per the Australian Window Association – An Industry Guide to the Correct Fixing of Windows and Doors? |
Satisfactory response | ||||||||||||||||||||||||||||||||
| Yes ☐ |
No ☐ |
|||||||||||||||||||||||||||||||||
| |
||||||||||||||||||||||||||||||||||
| Q2: | Discuss the workplace quality policies and standards relevant to installing windows and doors. |
Satisfactory response | ||||||||||||||||||||||||||||||||
| Yes ☐ |
No ☐ |
|||||||||||||||||||||||||||||||||
| |
||||||||||||||||||||||||||||||||||
| Q3: | Discuss the safety requirements related to installation of doors and windows. |
Satisfactory response | ||||||||||||||||||||||||||||||||
| Yes ☐ |
No ☐ |
|||||||||||||||||||||||||||||||||
| |
||||||||||||||||||||||||||||||||||
| Q4: | Answer the following questions: 4.1. What are the flashing requirements relevant to installing windows and doors? 4.2. Explain the installation techniques relevant to installing. 4.3. Explain the installation techniques relevant to installing doors. |
Satisfactory response | ||||||||||||||||||||||||||||||||
| Yes ☐ |
No ☐ |
|||||||||||||||||||||||||||||||||
| |
||||||||||||||||||||||||||||||||||
| 5: | Answer the following questions: 5.1 Explain the key features of plans and drawings in carpentry work. 5.2 Explain the purpose of the following plans and drawings. a) Site Plan b) Cross Section c) Elevation 5.3. Discuss the following specifications related to installation of doors and windows. a) Standard sizes b) Tolerances c) Material d) Position of holes e) Fixing screws and lugs |
Satisfactory response | ||||||||||||||||||||||||||||||||
| Yes ☐ |
No ☐ |
|||||||||||||||||||||||||||||||||
| |
||||||||||||||||||||||||||||||||||
| Q6: | Document two (2) characteristics, uses and limitations each of the following tools and equipment: –
|
Satisfactory response | ||||||||||||||||||||||||||||||||
| Yes ☐ |
No ☐ |
|||||||||||||||||||||||||||||||||
| |
||||||||||||||||||||||||||||||||||
| Q7: | Discuss the processes for setting out windows and doors. | Satisfactory response | |
| Yes ☐ |
No ☐ |
||
| |
|||
| Q8: | Answer the following questions: 8.1. Calculate the quantity of material for installing doors by taking dimensions given in figure into consideration. 8.2. Write the steps for calculating quantity of material for installing windows. |
Satisfactory response | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Yes ☐ |
No ☐ |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Q9: | Prepare a list of any seven (7) materials use for installing windows and doors. | Satisfactory response | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Yes ☐ |
No ☐ |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Q10 | Answer the following questions: 10.1. Describe the various types of doors in 1-2 sentences each: · Flush panel door · Framed and panelled door · Glazed door 10.2. Explain the hinged doors units, including the following. · standard doors · sliding, · flywire, · combination window and door units, · door sidelight units (glazed or unglazed) · internal doors 10.3 Describe the following components of doors. · jambs · stiles · sills |
Satisfactory response | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Yes ☐ |
Yes ☐ |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Q11 | Explain the following the door furniture. · flush pulls · latches and deadlocks · push plates and closers · handles and locks |
Satisfactory response | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Yes ☐ |
Yes ☐ |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 12 | 12.1. Mention the name, material, characterstics and uses of the type of doors given in column 2 of the table.
|
Satisfactory response | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Yes ☐ |
Yes ☐ |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
- Assessment Results Sheet
| Outcome |
|
||
| Student Declaration | · I declare that the answers I have provided are my own work. Where I have accessed information from other sources, I have provided references and/or links to my sources. · I have kept a copy of all relevant notes and reference material that I used as part of my submission. · I have provided references for all sources where the information is not my own. I understand the consequences of falsifying documentation and plagiarism. I understand how the assessment is structured. I accept that the work I submit may be subject to verification to establish that it is my own. · I understand that if I disagree with the assessment outcome, I can appeal the assessment process, and either re-submit additional evidence undertake gap training and or have my submission re-assessed. · All appeal options have been explained to me. |
||
| Student Signature | |
||
| Date | |
||
| Trainer/Assessor Name | |||
| Trainer/Assessor Declaration | I hold: ☐ Vocational competencies at least to the level being delivered ☐ Current relevant industry skills ☐ Current knowledge and skills in VET, and undertake ☐ Ongoing professional development in VET I declare that I have conducted an assessment of this student’s submission. The assessment tasks were deemed current, sufficient, valid and reliable. I declare that I have conducted a fair, valid, reliable, and flexible assessment. I have provided feedback to the student. |
||
| Trainer/Assessor Signature | |||
| Date | |
||
| Office Use Only | The outcome of this assessment has been entered into the Student Management System on _________________ (insert date) by (insert Name) __________________________________ |
Name: Install Windows And Doors